Contents • • • • • • • • • • • History [ ] In 1899, the United States Army and Navy placed orders with Smith & Wesson for two to three thousand Model 1899 Hand Ejector revolvers chambered for the M1892 U.S. Service Cartridge. With this order, the Hand Ejector Model became known as the.38 Military and Police model. That same year, in response to reports from military sources serving in the Philippines on the relative ineffectiveness of the new cartridge, Smith & Wesson began offering the Military & Police in a new chambering,.38 S&W Special (a.k.a..38 Special), a slightly elongated version of the.38 Long Colt cartridge with greater bullet weight (158 grains) and powder charge increased from 18 to 21 grains of gunpowder.
In 1902 the.38 Military & Police (2nd Model) was introduced, featuring substantial changes. These included major modification and simplification of the internal lockwork and the addition of a locking underlug on the barrel to engage the previously free-standing ejector rod. Barrel lengths were 4, 5, 6, and 6.5 inches with a rounded butt. Serial numbers for the Military & Police ranged from number 1 in the series to 20,975. Most of the early M&P revolvers chambered in.38 Special appear to have been sold to the civilian market. By 1904, S&W was offering the.38 M&P with a rounded or square butt, and 4-, 5-, and 6.5-inch barrels.
The M14 rifle, officially the United States Rifle, 7.62 mm, M14, is an American selective fire automatic rifle that fires 7.62×51mm NATO (.308 in) ammunition.
The.38 4th Change, introduced 1915, incorporated a passive hammer block and enlarged service sights that quickly became a standard across the service revolver segment of the industry. Of cylinders began in 1919. Driver Easycap002 Usb Dvr Windows 7 Downloads. The M&P 1905 Fourth Change variant (1915). The lock mechanism remained principally unchanged after this model. Victory Model [ ] The S&W Model 10 military revolvers produced from 1942 to 1944 had serial numbers with a 'V' prefix, and were known as the Smith & Wesson Victory Model. It is noteworthy that early Victory Models did not always have the V prefix. During World War II over 570,000 of these pistols were supplied to the United Kingdom, Canada, Australia, New Zealand, and South Africa under the program, chambered in the British caliber already in use in the and the.
Most Victory Models sent to Britain were fitted with 4-inch or 5-inch barrels, although a few early versions had 6-inch barrels. The Victory Model was used by United States forces during World War II, being chambered in the well-known and popular cartridge. The Victory Model was a standard-issue sidearm for United States Navy and Marine Corps aircrews, and was also used by security guards at factories and defense installations throughout the United States during the war. Some of these revolvers remained in service well into the 1990s with units of the United States Armed Forces, including the. Until the introduction of the 9mm pistol in 1990, U.S. Army helicopter crew members and female officers were equipped with.38 caliber Victory Model revolvers.
Agents were issued.38 caliber revolvers with two inch barrels. The Victory Model remained in use with Air National Guard tanker and transport crews as late as in 1991.
Some Lend-Lease Victory Model revolvers originally chambered for the British.38/200 were returned to the United States and rechambered to fire the more popular and more powerful.38 Special ammunition, and such revolvers are usually so marked on their barrels. Rechambering of.38-200 cylinders to.38 Special results in oversized chambers, which may cause problems. Was carrying a re-chambered Victory Model when he was apprehended on November 22, 1963. The finish on Victory Models was typically a and finish, which is noticeably different from the higher-quality blue or nickel/chrome finishes usually found on commercial M&P/Model 10 revolvers. Other distinguishing features of the Victory Model revolver are the lanyard loop at the bottom of the grip frame, and the use of smooth (rather than checkered) walnut grip panels. However some early models did use a checkered grip, most notably the pre-1942 manufacture.
Post-World War II models [ ] After World War II, Smith & Wesson returned to manufacturing the M&P series. Along with cosmetic changes and replacement of the frame fitting grip with the Magna stocks, the spring-loaded hammer block safety gave way to a cam-actuated hammer block that rode in a channel in the side plate (Smith 1968). In 1957, Smith & Wesson adopted the convention of using numeric designations to distinguish their various models of handguns, and the M&P was renamed the Model 10. The M&P/Model 10 has been available in both blued steel finish and nickel finish for most of its production run. The model has also been offered throughout the years with both the round butt and square butt, i.e., grip patterns.
Beginning with the Model 10-5 series in the late 1960s, the tapered barrel and its trademark 'half moon' front sight (as shown in the illustrations on this page) were replaced by a straight bull barrel and a sloped milled ramp front sight. Late model Model 10s are capable of handling any.38 Special cartridge produced today up to and including rounds.
As of 2012 the Model 10 was available only in a 4-inch barrel model, as was its stainless steel (Inox) counterpart, the. Model 10 Engineering and Production Changes Timeline [ ] As the Model 10 evolved, the following Engineering and Production Changes were made: • 10 (1957): begin stamping model number. • ^ Supica, Jim; Richard Nahas (2001). Standard Catalog of Smith & Wesson. Iola Wisconsin: Krause Publications.
• Boorman, Dean K., (2002), p. 46: 'The.38 in Military and Police Model 10 has historically been the mainstay of the Smith & Wesson Company, with some 6,000,000 of this general type produced to date. It has been described as the most successful handgun of all time, and the most popular centerfire revolver of the 20th Century.' • ^ Cumpston, Mike (2003-01-16).. Retrieved 2008-05-02. • Smith, W.H.B (1968). Book of Pistols and Revolvers (7th ed.).
Harrisburg: Stackpole Books. (Capt), With British Snipers to the Reich, Paladin Press (1988), p. 55 • Dunlap, Roy, Ordnance Went Up Front, Samworth Press (1948), p. 142 • (15 March 2010).. Iola, Wisconsin: Gun Digest Books. • ^ Supica, Jim; Nahas, Richard (2007).. Download Ngage Installer Sisx.
Iola, Wisconsin: F+W Media, Inc. Pp. 141–143, 174, 210–211.. • Martin, Orlando (January 2010)..
Dog Ear Publishing. • Hunter, Hunter (2009). 'S&W Victory & Colt Commando Revolvers'.
American Rifleman. Fairfax, Virginia: National Rifle Association of America. 157 (6): 36–37..
• Shideler, Dan (7 August 2011).. Iola, Wisconsin: Gun Digest Books. • • • ^ Arnold, David (28 February 2011).. Iola, Wisconsin: Gun Digest Books. • ^ Cite error: The named reference Arnold2017 was invoked but never defined (see the ). • Sugiura, Hisaya (September 2015). 'Pistols of the Japanese police in the postwar era'..: 72–79.
• • • Schwing, Ned (5 November 2005).. Iola, Wisconsin: Krause Publications. External links [ ] Wikimedia Commons has media related to. • • • at the.